LSZH XLPE Medium Voltage Cable: Selection Guide, Specifications, and Applications
LSZH XLPE medium voltage cable is designed to transmit power at medium voltage while combining cross-linked polyethylene (XLPE) insulation with a low-smoke, zero-halogen outer sheath. It can be a suitable option for infrastructure, industrial, and building projects where electrical performance and reduced smoke and corrosive-gas emissions during a fire are important considerations. The right cable depends on the system voltage, installation environment, conductor and screen design, applicable standards, and project requirements. At Chuangjin Cable, we recommend confirming these details before requesting a quotation or approving a cable construction.
Click here to get more.
Key Takeaways
- Specify the system voltage and the cable’s rated voltage using the notation required by the applicable standard.
- XLPE provides electrical insulation; an LSZH sheath addresses smoke and halogen-related requirements. Neither designation alone confirms a cable’s fire-survival performance.
- Conductor material, number of cores, metallic screens, armor, and installation conditions affect the final design.
- Ask suppliers for construction details, applicable test documentation, and a clear statement of the standards and project requirements covered by their offer.
Who This Guide Is For
This guide is for electrical contractors, project engineers, procurement teams, distributors, and consultants evaluating medium voltage power cable. It is intended to help buyers prepare a technically useful inquiry and compare offers on a like-for-like basis. Final cable selection should be checked against the project’s electrical design, local regulations, and the applicable cable standard.
What Is LSZH XLPE Medium Voltage Cable?
XLPE is cross-linked polyethylene used as the cable’s primary insulation. Its electrical properties and thermal performance make it a common insulation choice for power cables, while the cable’s conductor screen, insulation screen, metallic screen, and protective sheath are selected to suit the voltage and installation. LSZH, also written as low smoke zero halogen, generally describes sheath materials intended to limit smoke and halogen-acid gas release under specified fire-test conditions.
These terms describe different parts of the cable design. XLPE does not mean the cable is fire-resistant, and an LSZH sheath does not by itself mean the cable will continue operating during a fire. If a project requires circuit integrity, fire resistance, or particular flame-propagation performance, specify the required test method and performance separately.
Common Construction Options
- Conductor: Copper or aluminum, with size and stranding selected for the project’s current, voltage-drop, and installation requirements.
- Insulation system: Conductor screen, XLPE insulation, and insulation screen, as required by the design and applicable standard.
- Metallic screen: Commonly a copper wire or tape construction; its design should be coordinated with the earthing and short-circuit requirements.
- Outer protection: An LSZH sheath, with armor or other protective layers considered where mechanical conditions require them.
- Core arrangement: Single-core or three-core designs, selected to match system layout, installation method, and project preferences.
Specifications Buyers Should Confirm
Start with the system voltage and the cable’s rated voltage, rather than choosing a product based only on the phrase “medium voltage.” For example, 6/10 kV and 8.7/15 kV are commonly used rating notations in cable specifications, but suitability depends on the system and the governing standard. IEC 60502-2 is one standard buyers may encounter for extruded-insulation power cables in its stated voltage scope; confirm the exact edition and requirements in the project documents.
Thermal limits also need to be stated in context. A commonly specified maximum conductor temperature for XLPE cable during normal operation is 90°C, while 250°C is a commonly referenced short-circuit conductor limit for a limited duration. These values are not a substitute for the manufacturer’s datasheet or the applicable standard: allowable loading depends on cable construction, installation conditions, ambient temperature, and the defined fault duration.
Information to Include in a Cable Schedule
- System voltage, rated voltage, frequency, and earthing arrangement.
- Conductor material, cross-sectional area, and number of cores.
- Metallic screen construction and required fault-current duty.
- Installation method, route length, burial or duct conditions, and mechanical protection needs.
- Required sheath properties, fire-test requirements, applicable standards, and any project-specific documentation.
Matching the Cable to the Application
LSZH XLPE medium voltage cable may be considered for power distribution in industrial facilities, utility-related projects, transport infrastructure, commercial developments, and other installations where the design calls for medium voltage cable and LSZH sheath properties. The application alone does not determine the cable construction. A cable routed underground, in a duct, on a tray, or in a building may face different thermal, moisture, chemical, and mechanical conditions.
Indoor and Public-Facing Installations
In enclosed or populated areas, project teams may specify LSZH materials to address smoke and halogen-acid gas concerns during fire exposure. Buyers should verify the exact test requirements, because “LSZH” is not a single universal performance grade. Where fire survival is also required, request a cable design and evidence that specifically address that requirement.
Chuangjin Cable contains other products and information you need, so please check it out.
Outdoor, Underground, and Industrial Routes
For outdoor or buried routes, evaluate moisture exposure, soil conditions, temperature, pulling forces, and potential impact or crushing. Armor may be appropriate in some installations, but its selection must fit the project’s mechanical and electrical design. In industrial environments, also identify any exposure to oils, chemicals, or other substances and confirm compatibility with the proposed sheath materials.
A Practical Selection Framework
- Establish the electrical basis. Confirm system voltage, rated voltage, load, fault level, earthing method, and protection requirements with the project engineer.
- Define the route. Document installation method, route length, ambient conditions, grouping, and thermal environment so that ampacity and voltage-drop calculations use relevant inputs.
- Select the construction. Compare copper or aluminum conductors, core arrangement, screens, armor, and sheath options against the design requirements.
- State compliance requirements. Identify the required standard, edition, inspection plan, routine tests, and any additional fire-performance tests in the inquiry.
- Review the offer technically. Check the construction description, rated voltage, dimensions where relevant, documentation, packaging, and any listed deviations before comparing price.
Pricing, MOQ, and Lead-Time Considerations
There is no reliable single price for LSZH XLPE medium voltage cable without a defined specification and quantity. Cost can vary with conductor material and size, voltage class, screen and armor construction, sheath compound, order length, packaging, and inspection requirements. If a quotation appears substantially lower than alternatives, compare its technical scope and exclusions before treating the offers as equivalent.
Minimum order quantities and production lead times depend on the requested design, available materials, order volume, and manufacturing schedule. For planning, provide the required quantity, delivery location, target delivery date, and whether partial deliveries are acceptable. At Chuangjin Cable, we can review the project specification with buyers and clarify which construction details are needed to prepare a comparable offer.
Supplier Evaluation Checklist
Ask the supplier to identify the proposed cable construction and the standard against which it is offered. Request relevant datasheets and test documentation for the specific product and confirm whether the documents cover the requested voltage, materials, and tests. Avoid relying on generic product descriptions when the project requires documented compliance.
Also check how the supplier handles technical questions, specification deviations, packaging, marking, and delivery coordination. A clear quotation should distinguish confirmed product details from options that still require approval. If a requirement cannot be verified from the offer or supporting documents, resolve it in writing before placing an order.
Conclusion: Is LSZH XLPE Medium Voltage Cable Right for Your Project?
LSZH XLPE medium voltage cable can be a suitable choice when the project requires XLPE-insulated medium voltage power cable and specifies a low-smoke, zero-halogen sheath. It is not automatically fire-resistant, and the LSZH designation alone does not establish the cable’s rating, construction, or compliance with a particular fire test. The best selection is the one that matches the electrical design, installation route, standards, and documented project requirements.
Before requesting a quotation, prepare the voltage rating, conductor and core requirements, route conditions, screen and armor needs, applicable standards, quantity, and delivery schedule. Share the specification with Chuangjin Cable for a project-specific technical review and quotation. This gives your team a practical basis for checking suitability, comparing suppliers, and moving toward procurement with fewer unresolved assumptions.


